How big can an ender quarry be?

The Ender quarry, according to RWTema, has no limit.

How do you make a quarry bigger in Tekkit?

The default frame of the Quarry will occupy an area of 11 x 11 x 5 and excavate a 9 x 9 area of land. These dimensions can be increased, up to 64 x 64. To adjust the size of the Quarry, four Landmarks will need to be placed in a square or rectangular pattern, then activated by right clicking one of them.

Can you power a quarry with RF?

A Quarry should be powered with at least 20 RF/t, though more energy will help it run faster. Its maximum power consumption is 1000 RF/t but its speed is not linear to the power input; a Quarry using 1000 RF/t is not twice as fast as one powered by 500 RF/t.

How do you extract an ender quarry?

Once the whole area has been mined, the Ender Quarry will stop drawing power and display the message: “Quarry is Finished” if ‘Right-clicked’. The Ender Quarry will examine and exchange close to one block per second using 100 RF/ t, i.e. powering it with 400 RF/t will extract 3.5 to 4 blocks per second.

Can you power a Quarry with RF?

Can you convert RF to EU?

The conversion rate of RF to MJ is 10:1. MJ to EU is 1:2.5. So, 10 RF is the same as 2.5 EU if IIRC. One bucket of lava in a geothermal generator gives 20k EU.

How big is the quarry in feed the Beast?

The quarry is a Buildcraft machine that is used to automatically mine out large areas. By default, it will mine out a 9×9 area with a frame of 11×11. However, this can be extended to a max of 62×62 mining area with a frame of 64×64 or shortened to a minimum of a 3×3 frame by using landmarks (only 3 are required).

How big of a quarry can I build in Minecraft?

It is not possible to build a quarry larger than 64×64, which is stated on the wiki: By default, it (the Quarry) will mine out a 9×9 area with a frame of 11×11. However, this can be extended to a max of 62×62 mining area with a frame of 64×64.

How can I Make my quarry bigger than 9×9?

Follow the blue laser in one direction and place the second land mark. Go back to original landmark and go off in the other direction and place the third land mark. Go back to original landmark again, and right click it. This will create red lasers. Place your quarry by the original landmark.

How many land marks do you need for a quarry?

Land Marks can be used to define an operating area for the Quarry. The area can be expanded to a maximum of 64 x 64 blocks with 3 Land Marks or shrunk to a minimum of 3 x 3.