Why wont my PS2 read discs?

Why wont my PS2 read discs?

It could be a problem with its wiring (the motors ribbon cable sometimes is the problem, so inspect that) or it has simply died. If not a motor problem. It could also be that the laser can’t read the disk/detect there is one, the motor won’t spool up/spin. The laser is what tells the motor to pin, go a set speed etc.

How can I fix my PS2?

Make sure you put the PS2 back together exactally how it was before you took it apart.

  1. Step 1: The First Step. First you need to take out all those square things on the bottom of your PS2.
  2. Step 2: Take Out the Screws.
  3. Step 3: Opening Up the Laser Box.
  4. Step 4: Clean the Laser.

How do you reset a PlayStation 2?

There is no factory reset option, because there aren’t many settings to change, and the ones that can be are easy to change manually. DVD Parental Control code has a master override, so you don’t need to know the code to erase it.

How do I reset a PS2?

What should I do if my PS2 wont work?

There needs to be a power source for the PS2 to work. Make sure that your PS2 is plugged into the wall outlet, that the outlet works and that the power plug is plugged into the PS2. This could result from a number of things but ultimately you will need to replace it if this is the problem. Use this guide to help you.

Why does my PS2 not read game discs?

This may be due to our rough use, our friend’s rough use, whatever. A scratched game disc will be quite irritating to play with and the PS2 may not even read it. So, let’s begin. Take a small amount of toothpaste and lay it on your preferred disc.

What to do if your PS2 game disc is scratched?

At one time or another, there will be a point where we will have to fix our video game disc. This may be due to our rough use, our friend’s rough use, whatever. A scratched game disc will be quite irritating to play with and the PS2 may not even read it. So, let’s begin. Take a small amount of toothpaste and lay it on your preferred disc.

Why does my PlayStation 2 not turn on?

Won’t Power On. The PS2 just won’t turn on. There needs to be a power source for the PS2 to work. Make sure that your PS2 is plugged into the wall outlet, that the outlet works and that the power plug is plugged into the PS2.

What should I do if my PS2 won’t read the disc?

Wait for the PS2 to read and load the contents of the disc. If the console fails to read the disc, open the loading tray, turn the PS2 off and remove the loading-tray cover. Use the gear to raise the laser lens height by one notch and repeat the procedure until the console reads the disc. 8.

What should I do if I scratched my PS2?

Apply your deodorant all around the disc. Be careful, as too much deodorant can cause damage to the layers of the disc and the PS2 laser won’t be able to take all that damage. Immediately rub the disc slowly with a clean, soft cloth.

What should I do if my PlayStation 2 wont load?

The best we’re hoping for is that we can get it to load at least 10% of the time. More on that later. To begin with, remove any add-ons you might have for your Playstation 2, like the Network Adaptor. They’ll just get in the way. Flip the Playstation 2 upside down and remove all the rubber feet and square tabs.

Is it worth voiding the warranty on a PS2?

It’s not worth voiding your warranty if you can survive without it for a week or so. If your PS2 can’t read anything at all, cross your fingers and read on, but you may have a more serious issue than we can fix. I am using a model SCPH-30001 Playstation 2, with a U serial number.