How do I find my facility code?

How to Find Your Facility Code

Look at the label on your last box of cards – your facility code will be listed there with your card information.
Look at your access control software to see your facility code.

What card format is H10301?

26-bit
The HID ordering code number for the Standard 26-bit format is H10301. H10301 has 255 possible facility codes from one to 255. There can be up to 65,535 card ID numbers, from one to 65,535, per facility code. The total number of cards that can use the entire range without duplication is 16,711,425.

How do I find my HID card number?

How to Determine an HID Card Number

Turn over a working HID card. Typically, if you are using an HID card for physical access, the HID logo will be on the back of the card.
Locate the small numbers printed on the bottom right side of the card.
Call HID at 800-872-5359 or send HID an email (see Resources).

What is ABA card format?

This format was developed by the banking industry (ABA). This track is written with a 5-bit scheme (4 data bits + 1 parity), which allows for sixteen possible characters, which are the numbers 0-9, plus the six characters : ; < = > ? .

What is a prox number?

Prox cards use a low 125 kHz radio frequency to transmit to a door access reader. When the card is placed on the reader, the card’s unique strand of numbers is passed to the access control panel, which verifies if the number matches an approved number in the internal database.

What is 26 bit Wiegand?

In access control 26-bit is the industry standard, open encoding format. The data encoded using 26-bit format consists of 255 possible facility codes and within each there is a total of 65,535 unique card numbers. This is a relatively small number of unique cards, so additional authentication is often used.

Is Wiegand a RS485?

Wiegand is a standard interface used in contactless card readers. Wiegand to RS485 bidirectional interface converter. Thus, standard contactless card readers can be easily connected to a PC or similar system wia RS485 interface. Wiegand is a standard communication protocol used by contactless card readers.

How do I program my HID access card?

Understanding Your Programming Choices & Options

Step 1 – Find the Right HID Prox Format and Part Number. HID manufacturers a number of credential formats.
Step 2 – Specify Your Programming Information.
Step 3: Choose Your Card Range and Facility Code.
Step 4: Choose Between Pre-Selected or Custom Programming.

What is HID smart card?

What is an HID Card? Like other proximity and RFID cards, an HID card is simply an ID card which enables proximity technology in its everyday functions. HID cards, as well as other types of RFID cards and smart cards, are popular for access control, as well as other functions like public transportation and employee ID.

What is a card format?

A “format” is the structure of the binary data stored in the card. The number of ones and zeros, and how they are put together, determines the format and ultimately the credential number. When a card is waved in front of a reader, those numbers are sent to the access controller.

How do prox cards work?

How do proximity cards work? Prox cards use a low 125 kHz radio frequency to transmit to a door access reader. When the card is placed on the reader, the card’s unique strand of numbers is passed to the access control panel, which verifies if the number matches an approved number in the internal database.

How do swipe cards work?

Swipe cards or magnetic stripe cards work by storing data in a magnetic layer placed on a card. You must pull through or swipe the card through a magnetic reader to be able to confirm the data stored on it, and enable the card access system to do its work.

Which is the same card format 125 kHz or 13.56 MHz?

All specific card formats are identical in both 125 kHz Prox and 13.56 MHz iCLASS®cards. This ensures that any controller capable of understanding data from 125 kHz cards and readers will also seamlessly work with 13.56 MHz cards and readers.

What’s the maximum facility code for a card?

• The maximum Facility Code is 255 because if all eight Facility Code bits are set to ones, they equal 255 decimal. • The maximum Card Number is 65,535 because when all sixteen Card Number field bits are ones, it equals decimal 65,535.

Can a 125 kHz prox card be read at 13.56 MHz?

All specific card formats are identical in both 125 kHz Prox and 13.56 MHz iCLASS® cards. This ensures that any controller capable of understanding data from 125 kHz cards and readers will also seamlessly work with 13.56 MHz cards and readers.

How big is an A5 greetings card blank?

Our size chart below reflects this. The size of greetings cards and card blanks is measured by the size of the folded card. For example an A5 card blank measures 148 mm x 210 mm but is actually A4 sized when unfolded.

All specific card formats are identical in both 125 kHz Prox and 13.56 MHz iCLASS® cards. This ensures that any controller capable of understanding data from 125 kHz cards and readers will also seamlessly work with 13.56 MHz cards and readers.

How is the number on a proximity card programmed?

The cards are programmed with sequential numbering based on the starting number you specify. It is important that you do not overlap card ranges . If two cards are identically programmed, your system will not be able to distinguish between them.