What equipment do you need to live stream music?

There are three basic tiers of audio live streaming equipment:

Low—Medium Quality: For example the built-in microphone on entry-level and prosumer cameras.
Medium-High Quality: USB and 3.5mm microphones, or built-in microphones on professional live video cameras.
Professional Quality: XLR microphones.

How can I improve the sound quality of live streaming?

To help boost your audio quality, try these tips for your videos and broadcasts.

Use a video switcher or streaming software to control the audio feed.
Use quality mics and a preamp or audio interface.
Mix the sound appropriately and pull the audio feed off the soundboard if possible.
Test your audio before going live.

How do I make live stream clearer?

11 actionable tips to improve your live streaming quality

Tip 1 – Check upload speed.
Tip 2 – Use Ethernet cable.
Tip 3 – Try going live at different times of day.
Tip 4 – Limit the ongoing tasks.
Tip 5 – Disable other connections.
Tip 6 – Video quality vs. Stream quality.
Tip 7 – Adjust the video bitrate.
Tip 8 – Change the FPS (Frames per second)

Why does my stream audio sound bad?

One of the most common audio problems streamers face is excessive background noise. Cardioid mode captures sound sources that are directly in front of the microphone, making it the perfect choice for eliminating background noise while streaming.

Why does my OBS audio sound muffled?

Active Member Make sure you have the right mic selected in your Audio settings. OBS defaults to the “windows default”, so whatever windows has set as the default microphone will be what you start out with.

How do I fix the sound on OBS?

How to troubleshoot OBS audio issues

Step 1: Check your audio settings.
Step 2: Add filters to your audio source.
Step 3: Add the noise suppression filter.
Step 4: Add the compressor filter.
Step 5: Add the gain filter.
Step 6: Add the limiter filter.
Step 1: Open your advanced audio properties.
Step 2: Give your audio a 220ms sync offset.

How do I fix muffled audio on OBS?

Go to the recording tab then right click and open the CABLE Output properties. Open the Listen tab then check the “Listen to this device” box. Just below that, set the “Playback through this device” to your Headphones/Speakers. You should now be able to hear your audio like normal.

What is audio ducking?

Ducking temporarily lowers, or “ducks,” the volume level of a specified audio signal anytime a second specified audio signal is present. In live sound, ducking is commonly used to lower background music anytime a person speaks, then raises it when that person finishes speaking, as in the emcee example above.

What does noise gate do in OBS?

The Noise Gate allows you to cut off all background noise while you are not talking. Select a close threshold above the noise volume and an open threshold slightly below your voice input to get good results.

What does a noise gate do?

The basic function of a noise gate is to eliminate sounds below a given threshold. Noise gates are commonly used in the recording studio and sound reinforcement. Rock musicians may also use small portable “stompbox” units to control unwanted noise from their guitar amplification systems.

How do I get my microphone to pick up less background noise?

Click the “Recording” tab in the Sound window, select your microphone device, and click “Properties.” Click the “Levels” tab. If you’re dealing with background noise, try lowering the Microphone Boost option—perhaps to +10.0 dB instead of +20.

Does OBS have noise gate?

OBS provides 8 filters you can choose from. 2 of them, “Noise Gate” and “Noise Suppression” are for noise cancelling purposes. First, you can add Noise Suppression filter, which helps to reduce background noise.

How do you set up a noise gate?

How-to Use a Noise Gate in 8 Steps

Step 1: Patch your gate inline. Patch inline.
Step 2: Set Everything at Minimum and Threshold at Maximum.
Step 3: Slowly Lower the Threshold.
Step 4: Find your Sound.
Step 5: Set the Attack.
Step 6: Set the Hold.
Step 7: Set the Release.
Step 8: Adjust the Floor.

Does Streamlabs suppress noise?

By introducing a Noise Suppression filter you can get rid of these annoying background noises. When you add the filter, the suppression level will automatically be set to -30. In most cases, this level of suppression will actually be to much and may affect the quality and sound of your voice.

Why can I hear myself on Streamlabs OBS?

If you heard yourself before getting your webcam, if you heard yourself the moment you set up OBS, it was not OBS doing it. It’s more likely Windows or your headset drivers triggering a communication feature to enable sidetone.

What does mic noise gate mean?

Mic Monitor – This setting controls how loud you hear yourself through the headset when you speak into the mic. Noise Gate – This makes it easier to ensure your voice is coming through the mic, instead of background noise.

Why do I hear myself twice on stream?

1.) A misconfiguration in OBS (you have a device source set to “output to desktop” instead of “output to stream”), or. 2.) A misconfiguration in windows (mic set to play back to ‘listen’), or.

Why can I hear my microphone through my speakers?

I assume you mean that the microphone sound is being played back through the speakers constantly. Try the following: Under Microphone, check the Mute button. If the “Microphone” section is missing, go to Options -> Properties, and under the Playback section, enable it.

https://www.youtube.com/watch?v=eDGG0gEqIKY