What bitrate should I use for OBS recording?

4000 Kbps to 6000 Kbps

What bitrate is 1080P OBS?

Output Settings Tab

	Video Bitrate	Audio Bitrate
1080P	6,000Kbps	128Kbps
720P	3,000Kbps	128Kbps
480P	1,000Kbps	128Kbps
360P	600Kbps	96Kbps

Why are my OBS recordings laggy?

A stable and high-speed Internet connection is essential to avoid video lagging or freezing issues in OBS. Dropped frames means your connection is not stable. Check your connection speed using any speed test tool. Contact your service provider to fix the speed and network issue, if any.

Is it better to stream with x264 or Nvenc?

But there is a slight trade-off in quality, and the reality is that x264 looks better than both NVENC and AMF when given enough power to do its job. When selecting a x264 you can then adjust the CPU Usage Preset from ultrafast all the way down to slow and placebo.

Should I use software or hardware encoding OBS?

If you have a particularly powerful GPU or a dedicated streaming PC, consider using a hardware encoder. In most cases, the software encoder (x264) will be able to handle the encoding process, as long as your CPU isn’t being overly taxed in other areas.

Is hardware better than software?

Hardware has all of the components that make your particular device work, and without it, the software would not be accessible. The better the hardware, the more appealing (in theory) the experience. On other hand, we have software. It might not be tangible, but it’s what you interact with most.

Is hardware encoding good?

The pros of using a hardware encoder are as follows: Great performance, especially when you need extremely high-quality streaming. Awesome reliability, given that they’re built with one purpose — to encode. Higher encoding speed, leading to lower latency.

What is a good CPU percentage for streaming?

100%

What bitrate should I use for OBS recording?

Bitrate for recording and streaming should be set from 4000 Kbps to 6000 Kbps depending on your bandwidth, frame rate, and video resolution. Plus, note that Keyframe Interval should be set at 2, meaning that the video frame will be rendered every 2 seconds.

What is bitrate in OBS?

Video bitrate is how much data for your live stream is transferred within a second. If you say bps, you’re saying bits-per-second. Mbps is megabits-per-second. If you say kbps, it’s kilobits-per-second. Bitrate is how you measure the speed of uploads and downloads of your video.

What OBS settings should I use?

Bitrate Rule of Thumb

For 720p video at 30 frames per second, we recommend 1,500 to 4,000 kbps.
For 720p video at 60 frames per second, we recommend 2,500 to 5,000 kbps.
For 1080p video at 30 frames per second, we recommend 3,000 to 6,000 kbps.

For 1080p video at 60 frames per second, we recommend 4,500 to 9,000 kbps.

How do I make OBS record smoother?

Here are some ways you can reduce resource utilization and, hopefully, make both OBS and your programs run faster while encoding:

Downscale your output resolution.
Lower your frame rate.
Change your x264 preset.
Try Quicksync, AMF, or NVENC.
Check your sources.
Upgrade your hardware.

What is a good bitrate for 1080p 60fps?

between 4500 and 6000 kbps
For 1080p video at 60 frames per second, the recommended bitrate is between 4500 and 6000 kbps. The required upload speeds are between 5.6 Mbps and 7.4 Mbps.

What is a good bitrate for 1080p recording?

Recommended video bitrates for HDR uploads

Type	Video Bitrate, Standard Frame Rate (24, 25, 30)	Video Bitrate, High Frame Rate (48, 50, 60)
2160p (4K)	44–56 Mbps	66–85 Mbps
1440p (2K)	20 Mbps	30 Mbps
1080p	10 Mbps	15 Mbps
720p	6.5 Mbps	9.5 Mbps

Is 2500 a good bitrate?

For 720p video at 30 frames per second, bitrate should be between 2,500 and 4,000 kbps. That requires upload speeds between 3.2 Mbps and 5 Mbps. The required upload speeds are the same too, between 4.4 Mbps and 6.2 Mbps. For 1080p video at 60 frames per second, the recommended bitrate is between 4500 and 6000 kbps.

Is x264 better than Nvenc?

x264 provides quality preset settings from ultrafast to veryslow/placebo. On Turing-based NVIDIA GeForce GPUs (ex: RTX 20-Series and GTX 1660/Ti), NVENC produces an image quality comparable to the x264 medium preset. Older Pascal and Kepler GPUs produce an image comparable to x264 veryfast.

What is a good bitrate for 720p?

Why is OBS not recording smoothly?

It’s short because it doesn’t have a recording session. Make sure to choose current if you still have OBS open after recording, or previous if you’ve closed OBS and are re-opening afterward. If it’s a log from prior to that, then the logs will need to be uploaded or attached manually.

How many bitrate is 1080p 30fps?

Full HD with a standard Framerate (1080p, 30fps) > your bitrate should be 3,500 to 5,000 kbps.