Do I need a chain breaker?

The chain breaker mostly helps keep everything aligned properly, but you can do without it. I’ve used a hammer and improvised punch (nail), plus some vice grips without any problems to break and re-link a chain (some chains don’t come with master links).

DID chain cut and rivet tool km500r?

Designed to cut chain, press fit connecting Link side plates, and Rivet pin heads. May be used to cut any 520, 525, 530 (50), or 532 size chains. Professional forged steel chain tool is designed for heavy duty use. Compact size for easy storage, includes plastic storage case.

How much does a flare Master Link cost?

The flare can be as little as 0.152mm to 0.5mm but should never be over 0.7mm. The rivet pin should be flared just enough to keep the sideplate on, but not flared too much to bind the link. When using the RK Chain Press-Fit/Rivet Tool you should be able to feel when you’ve reached the right flare.

What can you use instead of a chain tool?

If you can’t do it this way by any chance, you need something to squeeze both chain links. Some basic pliers, or even needle-nose ones, will do. Using needle-nose pliers is better because they can reach between chainplates to press on the rollers. “Normal” pliers, however, can give you some challenge, but it’s doable.

How do you remove a motorcycle master link without tools?

Removing the Master Link Without a Special Tool

Position your bike. Flip your bike upside down, so it is supported by the seat and handlebars, with the drivetrain facing you.
Put the chain in the lowest gear.
Clean your chain!
Find the master link.
Press the pins on the master link inwards towards one another.

How do you remove an O ring master link?

With a clip type master link, it should be a simple matter of removing the clip and gently wiggling the side plate free. Then, the other half of the link ( with the pins secured to it ) should wiggle free.

How do you break a master link?

To disconnect this type of link, place one jaw of your pliers on the chain pin, and the other jaw on the open end of the clip. Then squeeze your pliers until the clip pops off. Then you can remove the outer plate and slide out the rest of the link.

Do all bike chains have a master link?

But you can easily remove it from a bike without any rear derailleur by being a bit tricky by pulling out the rear wheel. 4. Do all bike chains have a master link? Nope, not all chains have master links.

Do Shimano chains have a master link?

However, even Shimano is now changing its tune and its latest 11 and 12 speed chains are available with master links.