Why is the sound not working on my videos?

Fix 1: The Volume Settings You might have turned down the sound and set the device to silent mode for any reason. The phone, therefore, has no sound once you play the video. Turn on the sound from the side button and you are done. Your device will start emitting sound once again.

Why do videos have no sound?

The first thing to check is that the volume is turned up on the device. The volume controls on the left-hand-side of the device can be used to increase and decrease the volume, so try adjusting these this whilst a video is playing to see if it affects the volume.

Why is there no sound when I play videos?

Even if the player’s volume is turned all the way up, sound will not come out of the speakers if the computer system’s volume is turned all the way down or if an external speaker system is turned off or muted. Check your system sound settings if you’re unable to hear the sound on a YouTube video.

How do you unmute a video?

Swipe right or left to find the video clip you would like to change the audio options for. 3. Tap on the 3 dots below the video clip and tap on “Mute” or “Unmute” in the dropdown menu.

Why does my video have no sound on Facebook?

4. Facebook videos have no sound on Android Samsung phones/tablets. First of all, check if the silent/vibrate switch is turned on. Make sure the Android device has the latest software update, to check go into settings > about device > software update > check for updates.

Why is the volume on my phone so low?

Causes of Problems With Android Phone Volume Your phone is tethered via Bluetooth to another device that plays sound. An app is running in the background that controls the overall volume. Do Not Disturb Mode is active. The speakers or headphones have hardware problems.

How do I increase the volume on my keypad phone?

Increase Speaker volume on Android Phone

Adjust the orientation of your smartphone. Be careful where the location of your speaker is as sometimes it may get blocked by your fingers or when it’s lying on a surface.
Using Equalizer.
Use a third-party application.
Brush the Dirt and Increase the volume.

Why is turntable volume low?

If the sound is still way too low after you have verified that a phono preamp is connected correctly in your system, it might in some rare cases be because your turntable cartridge is a moving coil (MC) type and your preamp is set up to work with a moving magnet (MM) cartridge.

Can you adjust the volume on a turntable?

You cannot control volume from the unit itself. If you don’t buy powered speakers with volume, then this may not be the model for you. However the ones that have built in speakers and volume just be sure you are getting quality. see less Hi, you can use in line speakers that have a volume control on it.

Why is my at2020 so quiet?

Your problem is the lack of an actual preamp. Phantom Power does not do anything to the actual microphone signal level, it merely provides the capacitor circuitry in a condenser microphone with the power necessary to operate. However, the output from that microphone is still going to be extremely low.

Can you ground turntable to anything?

You might find that there is no grounding terminal. Don’t worry, you can still ground your turntable with just the grounding cable and the actual body of the amplifier.

Why do you have to ground a turntable?

The reason there is a separate ground cable is to create a low-impedance path for any 60Hz currents induced by the electrical power system to flow between the your turntable chassis and the phono pre-amp section on your amplifier or receiver, thus keeping those noise currents out of the signal cables that interconnect …

Can you use speaker wire to ground turntable?

Speaker wire won’t work as a ground wire because the gauge is too small. In general, a single turntable ground wire should be attached to the ground post or a chassis screw and the turntable on the back side of the amplifier or the receiver as well.

How long can a turntable ground wire be?

two feet

Do I need to ground my amplifier?

In a nutshell, properly grounding amps is extremely important in order to obtain noise-free audio. A ground loop is an electrical fault that occurs when two pieces of equipment in the same system are not at the same ground potential.

Is it OK to ground amp to battery?

do NOT ground your amps to the battery! …and IF YOU DO, PLEASE fuse the ground! an in-line fuse won’t save your amp(s), but it should prevent a fire.