Where is Nexus NSFW mods?

Go to a mod page. Left click on the “Settings” icon (it look like a gear wheel). On the next page, left click “Content Blocking”. Under “Content”, left click on the circle next to “”Show adult content”.

How do I change my Nexus Mod profile?

Help Topic: Your Settings

You can access your settings from any page by selecting your name at the top of the screen and then selecting “My Settings”. There are several tabs on the side of the page, which allow you to configure and update different board settings: Profile Settings.
Profile Customization.
Signature.
Manage Facebook/Twitter.

How do I change users?

Switch or delete users

From the top of any Home screen, the lock screen, and many app screens, swipe down with 2 fingers. This opens your Quick Settings.
Tap Switch user .
Tap a different user. That user can now sign in.

How do I change the admin password on my Cisco Nexus?

Procedure

Use an SSH session to connect to the management IP of the switch containing the admin account.
Assign a new network administrator password. Type: configure terminal .
Type: username admin-name password new password .
Type: exit .
Save the configuration by typing: copy running config startup-config .

How do I reset a Cisco Nexus?

For Cisco Nexus 5000 Series switches, you must press Ctrl-R (Ctrl+Shift+R). switch# reload This command will reboot the system.

How do I reset my password on my Nexus?

Try to unlock your Nexus device 5 times and a “Forgot Pattern” option will appear. After selecting that, you can enter your Google Account email and password to unlock your device and reset your pattern.

How do I reset my Cisco Nexus password?

Password Recovery for Nexus Switches

Power on the device.
Wait until kickstart image has booted and the POST messages have appeared.
Right after the massage Checking all filesystems….
Enter the conf t command.
Type admin-password Ad123min.
Type exit.
Type dir bootflash: to view bootflash content.

How do I reset my Nexus 5K password?

How to Password Reset on Nexus 5K

Do a hard reboot by unplugging the power cable.
Careful watch the switch boot up and when it gets to “Loading system software” (see below) and send break command “Ctrl + ]”.
Once you successfully send a break command ( Ctrl + ] ) it will take you to the below screen.

How do I reset my password on my Nexus 9k?

To recover the password on Cisco Nexus 9000, you need to restart the switch. Enter in recovery mode with the following command cmdline recoverymode=1 and boot the image.

How do I save settings on Nexus 7k?

Saving the Running Configuration to the Startup Configuration

show running-config.
copy running-config startup-config.

What is copy running-config startup-config?

Enter the copy running-config startup-config command to save the current running configuration to the startup configuration file in NVRAM. To display the startup configuration, enter the show startup-config command.

How do I put memory in my Nexus switch?

2 Answers. In the handful of Nexus 5K’s that I have worked on, write mem is not supported. The only write command supported is write erase . Saving the running configuration is achieved with a copy running-config startup-config .

How do I check logs on Nexus switch?

To view your switch logs or related configuration information, use any of the following commands:

show logging console.
show logging last number.
show logging logfile [ start-time yyyy mmm dd hh : mm : ss ] [ end-time yyyy mmm dd hh : mm : ss ]

How do I view Cisco error logs?

To display the state of syslog error and event logging, including host addresses, which type of logging (destination) is enabled, and other logging statistics, use the show logging (privileged EXEC) command. This command also displays the messages that are logged in the buffer.

How do I test a syslog on a Cisco switch?

To view the current syslog configuration, use the show running-config system settings logging command in global configuration mode. nfvis# show running-config system settings logging system settings logging host 192.0.2.3 transport tcp port 1635 ! system settings logging host 192.0. 2.34 transport udp port 163 !

How do I check syslog on Cisco Nexus?

Configuring System Message Logging to Terminal Sessions

switch# terminal monitor.
switch# configure terminal.
switch(config)# logging console [severity-level]
switch(config)# no logging console [severity-level]
switch(config)# logging monitor [severity-level]
switch(config)# no logging monitor [severity-level]

How many syslog servers can be added to a Nexus 7000 series switch?

How do I enable login on Nexus?

In Nexus Repository Manager releases prior to 2.7, logging configuration needed to be done by editing the logback-nexus. xml file found in sonatype-work/nexus/conf . Once logging is configured as desired, you can inspect the impact of your configuration on the Log tab.

How do you collect switch logs?

Solution

Enter the IP or hostname of the Cisco or Brocade switch:
Make sure logging is turned on for “All session output” and then save the resulting putty.log file to a location of your choice.
For Brocade run the command supportshow.
For Cisco run the command show tech-support details.

How do I get brocade Supportsave?

Steps to collect supportsave.

Log onto the switch as admin using telnet or ssh.
At the command prompt type: supportsave.
You will be prompted as below: a) the IP address of your FTP server.
The files generated by this command are compressed before being sent off the switch. You can then collect (zip, tar, etc.)

How do you get Supportshow Brocade?

Log in to Brocade switch (default user: admin/default password: password), and then start to capture text. Select Transfer -> Capture text -> File C:supportshow.

How do I save my Brocade switch?

Configuration file contains all zoning information and configuration settings of fabric.

To take backup of configuration file first login into Switch by using admin account.
Give configupload command.
It will ask you host details in which server you want to save configuration file.