How do I fix E3 error on my washing machine?
How do I fix E3 error on my washing machine?
4 Answers
- Unplug The Washing Machine: Unplug the washer for 2-3 minutes.
- Check Wire Connections On Drive Motor: One fairly common issue that causes the 3E error code is connection problems.
- Check Wire Connections On Control Board:
- Check Hall Sensor:
What is E3 in Onida AC?
When the controller displays malfunction,please turn off the unit to stop the malfunction display,ask for the professional to debug….The meaning of error codes as shown in below:
| Error Codes | Meaning |
|---|---|
| E3 | Low pressure protection of compressor |
| E4 | Discharge temp. protection of compressor |
What is the meaning of EC in split AC?
Refrigerant Leakage Detection Error
What is E5 error in Onida AC?
The E5 (or ES) alert indicates that an internal protector in your Sensi thermostat’s power supply has tripped and your thermostat may no longer effectively control the temperature inside your home.
What is the meaning of E1 in AC?
Room Thermistor
What does E9 mean in Hitachi AC?
September 7, 2017 · Re: E9 ERROR IN HITACHI AC. E9 problem created because of motor problem ya motor connection problem .change the motor 100% ur problem will ressolved ya check the proper connection of motor through PCB.
Why does Hitachi AC blink red?
This RED Light indicator will glow to indicate that it is time to clean your after filter. After cleaning just press filter button of your AC remote so that this indicator will turn off and again glow when your AC filter gets dirty again. No need to press reset button.
Why is my Hitachi AC not cooling?
If the Hitachi AC does not cool, the compressor might be defective. The compressor is a motor which compresses the refrigerant or coolant and circulates the refrigerant through the evaporator and condenser coils. If the compressor goes bad the cooling cycle does not start and the Hitachi AC fails to cool.
Where is Hitachi AC error code?
Increase in Inverter Fin Temperature-Abnormal Inverter Fin Thermistor, Abnormal Outdoor Fan….Hitachi AC Error Codes and Troubleshooting.
| Code | Protection control |
|---|---|
| P05 | Discharge gas temperature increase protection at the upper part of the compressor |
| P06 | Low pressure decrease protection |
| P09 | High pressure decrease protection |
| P0A | Demand current protection control |
What does green light in Hitachi AC mean?
CAUTION. FILTER LAMP (Green) When the device is operated for a total of about 200 hours, the FILTER lamp lights indicates that it is time to clean the filter. The lamp goes out when the “ (AUTO SWING)” button is pressed while the operation is stopped.