How do you open a CD jewel case without breaking it?

Just use a pen or other pointed object and poke it into the small holes in the jewel case. Once you get one corner open the rest pop out easily. This is how I usually do it. I’ve done it several times & don’t remember any breaking.

How do I separate CDs?

Instructions:

Heat the disc. Heat the cd or dvd with a hairdryer set to high heat.
Separate the layers of the disc. Insert a butterknife in between the two layers of the CD, and gently wiggle it to pry the layers apart.
Cut into small pieces.

What should I do with old CDs?

Donate them Goodwill still sells CDs and DVDs and collects them at its drop-off locations. Many libraries also take them and will either stock them for checkout or sell them at sales or their used stores.

How can I use old CDs as Mosaic?

The first is to collect all the CDs, have them all cut to pieces, and THEN start gluing the pieces to the mosaic surface, preferably starting in one corner and moving it along from there. Easy peasy!

How do I burn a CD?

Step 1: Burning a data CD is simple enough. Just place a blank CD-R into your burner and close the tray. Open File Explorer and then check out the status of your CD burner — you should see an indication that a CD-R is inserted and how much space is free. Step 2: Decide which data files you can burn to the CD.

How do you cut a CD without it cracking?

HOW TO CUT DVDs and CD without SPLINTERS, CUT DVDS WITHOUT BREAKING THEM. Soak in hot water from the faucet for a few minutes, dry them off (you can also cut them wet), cut into pieces with scissors.

How do you safely destroy CDs?

The best way to totally destroy a CD/DVD is to incinerate it. You need quite a hot fire and good ventilation if you don’t want to end up with lumps of melted plastic or your lungs filled with noxious fumes. Despite these drawbacks, things don’t get much more secure than burning.

How do you make a hologram out of a CD case?

Here’s how.

Measure and mark. Step shots by Anthony Lam.
Score and cut. Slowly score the lines drawn on your CD case with a box cutter, and repeat carefully until it cuts through.
Assemble the pyramid.
Use it.

Can you cut CDs with scissors?

(Any sharp scissors will probably work.) When the CD is the right temperature, the scissors will easily cut it. If the CD is too cool when you are cutting it, the cut edge can become curled or dented, so take your time with this step, and be careful as you cut.

How do you make CD art?

CD Art

Step 1: Things Needed. Any old CD.
Step 2: Apply Paint. • Shiny side of the CD shows rainbow colors when light falls on it.
Step 3: Draw a Design. Draw your favorite design on the colored side.
Step 4: Scratch the Design.
Step 5: Stick It on the Wall.

Can you paint a CD and still play it?

It may work, but it will certainly be damaging to your CD/DVD and the CD/DVD drive of the computer. Paint starts to strip after some time. If it happens to do so while your CD/DVD is being read, it will certainly damage the readable side of your CD/DVD. It may also scratch and damage the lens of the laser.

Can you paint old CDs?

Recycle old CD’s. Paint with thin layer of Acrylic paint. When dry, draw design with pencil. Then scratch away.

Will acrylic paint stick to CDs?

First, you’ll need to apply a coat of acrylic paint to the CD. The reason why acrylic paint is used instead of any other kind is that it’s much easier to draw on since it’s water-based and not slick like oil paint. As soon as the paint dries, grab your pencil… Use the pencil to draw a design.

What paint do you use on CDs?

acrylic paints

What can you use to draw on CDs?

Yes, you can use an off-the-shelf permanent marker, but be careful where you write. The easiest way to label a CD-R is to whip out that permanent marker and write directly on the disc.

Can you put stickers on a CD?

if you use small lables there is an possibility that on high speeds the cd gets out off balance because one half off the cd is heavier than the other. Its a plain good idea to put stickers on top of a CD-R. Go ahead. Even I have had no problems with stickers.

Do CDs read from the top or bottom?

A CD is read from and written to (by laser) on one side only; a DVD can be read from or written to on one or both sides, depending on how the disc was manufactured.

How do I print labels directly on a CD?

To print CD labels click the ‘Print Item’ in the ‘File’ menu or on the ‘General’ toolbar. A Standard Windows Print dialog box will open. To print CD labels: choose a printer, set its properties if necessary and click ‘OK’ to proceed.

How do I make my own DVD labels?

There are many websites that offer free DVD labels for you to create.

Choose a DVD label program that meets your needs. You also can use a CD label program, considering DVDs and CDs are similar in size.
Download the desired program to your computer.
Type the title of your DVD on the label.
Print your DVD label.

Can you put a label on a DVD?

Use only round labels, specified as CD/DVD, with your discs — this will ensure that your disc is correctly balanced in the drive and the adhesive used on such labels is not harmful to the disc’s data layer. Once applied, labels should never be removed or repositioned, as this may delaminate the disc.

What is the proper size to print a CD cover?

The standard CD cover size is 4.75 by 4.75 inches, or 12 cm by 12 cm. This dimension is for the front or back cover of a standard jewel CD case. To use these dimensions for your document dimensions in Word, go to the Size menu on the Page Layout tab. Select More Paper Sizes from the menu.

How do you clean sticky CDs?

Sticky, greasy, gummy, or caked spots should be cleaned with baby shampoo or mild dish liquid mixed in lukewarm water; gently rub the CD surface with this solution using a soft cloth. If there are fingerprints on the surface, dip a soft cloth in isopropyl alcohol and gently wipe the surface.