How do you get on shape?

To get up and running with Onshape, all you need is a Mac, PC, Chromebook or Linux computer with a web browser such as Chrome, Safari, Firefox, Opera or Edge. That’s it – there’s nothing to download and nothing to install. Just navigate to cad.onshape.com and sign in with your username and password.

What is a circle pattern?

A circular pattern is an radial arrayof objects around a. Center point in a sketch. Axis in a part or assembly.

How do you rotate a circle on shape?

Select Faces and sketch regions to revolve. Select an axis about which to revolve. Select a Revolve type: Full – Revolve about the axis 360 degrees.

How do you make a shaped cone shape?

but if you just need a cone here’s a quick guide:

draw triangle.
revolve (choose sketch face for face and vertical line for revolve axis)
set full revolve to create a solid cone (I just opened a bit to show it’s solid inside)

How do you mirror a circle on shape?

You have the ability to use the Mirror tool in either of two ways:

Select the tool and then the mirror line and the entities.
Pre-select the mirror line, then select the tool, then select the entities to mirror.

What is construction geometry in CAD?

Construction geometry are sketch entities used in creating other geometry but not used in creating features. Construction geometry are sketch entities used in creating other geometry but not used in creating features.

What are the commands used in AutoCAD?

150 AutoCAD Command and Shortcut list, PDF eBook included

L. It can be used for making simple lines in the drawing.
C. It is the command used for making a circle in AutoCAD.
PL. This command can be used to make a Polyline in your drawing.
REC. This command will make a rectangle in AutoCAD.
POL.
ARC.
ELLIPSE.
REG.

How do you trim an Onshape?

Steps

Tap to select a curve segment to trim.
Continue tapping to select more curve segments to trim.

How do you remove part circle on shape?

Tap Delete part tool. Select the part or surface to delete (you are able to select in the graphics area or in the Feature list).

How do I use trim surface in Solidworks?

To trim a surface: Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.

How do you trim an Onshape extrusion?

Do the following:

Click on the extrude tool.
Select the circular face at the end of the tube that is sticking out.
Switch ‘Add’ to ‘Remove’

How do you combine extrude and on shape?

How it works

Tap the Versions and history icon to open the panel:
Tap the information icon next to the Source workspace and tap Merge:

How do you make a hollow cylinder on shape?

Steps

Tap Shell tool.
Optionally, toggle Hollow to shell (hollow) the part without removing any faces.
Select Faces to remove.
Specify Shell thickness.
Optionally, toggle to switch to the Opposite direction.
Tap the checkmark.

How many sketches are required to create a simple swept feature?

two sketches

What two sketches do I need to create a sweep feature?

The SOLIDWORKS Sweep feature has been improving over the years; unlike Extrude the Sweep feature requires at least two sketches to be selected, namely the Profile and Path.

How do you sweep in CAD?

SWEEP in AutoCAD

Type SWEEP and press ENTER.
Select object to sweep and press ENTER.
Select SWEEP path.

What is a sweep solidworks?

by Tutorial45 April 6, 2020. written by Tutorial45. SWEEP is the one feature in Solidworks that helps sweep a closed profile along a closed or open path. In this session, we are going to use a simple 3D object as an exercise to demonstrate the use of the SWEEP command in Solidworks.

How do you sweep the boss base?

Swept Boss/Base PropertyManager

Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path.
Click Swept Boss/Base (Features toolbar).