How do I connect to WPA2 wifi?

Configuring Android to Use Encrypted (WPA2-E) Wireless Services at UCSD

Configure your Wi-Fi. Select Settings.
Select the encrypted wireless service. Under Wi-Fi, select UCSD-PROTECTED.
Configure UCSD-PROTECTED option. EAP Method: Select PEAP.
Verify your connection.

How do I find out what my router password is?

First: Check Your Router’s Default Password

Check your router’s default password, usually printed on a sticker on the router.
In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties > Security to see your Network Security Key.

How do I find my Mercusys router password?

Note: To find the password, we need a computer physically connected to your router’s LAN port.

Log into MERCUSYS wireless router’s management page.
Please go to Wireless>Wireless Security page, and find out the Wireless Password you have created.

How do I log into my Mercusys router?

Launch a web browser and enter http://mwlogin.net or 192.168. 1.1 in the address bar. Use admin (all lowercase) for both username and password, and then click Login.

How do I access Mercusys router?

Mercusys Router Login Guide

Open your internet browser (e.g. Chrome, Firefox, Opera or Internet Explorer)
Type 192.168. 1.1 (the most common IP for Mercusys routers) in the address bar of your web browser to access the router’s web-based user interface.

How do I access my Mercusys router remotely?

Go to Security->Remote Management. Change the Web Management Port to other ports such as 8080 and Save. Please use LAN IP: new port number (in this example, it is http://192.168.1.1:8080) to access the router’s management page after you changed the web management port.

How do I configure my Mercusys router?

The WAN port is not used for this configuration.

Go to Network>LAN Settings on the side menu, choose Manual and change the LAN IP address of your MERCUSYS N router to an IP address on the same segment of the main router.
Example: If your DHCP is 192.168.2.100 – 192.168.2.199 then you can set the IP to 192.168.2.11.

How do I block a website on my Mercusys router?

Steps website block and Parental control in Mercusys wifi router. Choose the Mac address from the list of connected devices in the WiFi router. Parental Control: click the button to enable parental control in Mercusys router. Please set the effective time period during which the restriction applies.

How do I reset my Mercusys router?

You need reset it to factory default and configure it as a new one. Directly press and hold the reset button on the rear panel with a pin for approximately 10 seconds when the device is running. Release the reset button and wait for the device to reboot.

How do you change your wireless Internet password?

How to change your Router’s Wi‑Fi password

Open your browser to the configuration page of your router: You can access your router’s configuration page through your web browser on your computer connected to your network.
Enter your router’s username and password details:
Open the Wireless section:
Change the password:
Set your security type:
Save your settings:

How do I setup my Mercusys range extender?

How to set up the Mercusys Range Extender?

Launch a web browser, and enter http://mwlogin.net in the address bar. Create a password to log in.
Select your host router’s 2.4GHz SSID (network name) from the list.
Enter the password of your host router.