Can you change hard drive on PS3 Super Slim?

You need to remove all four screws and then reattach them, along with the caddy to your new hard drive. Then simply slide the new hard drive into the console, reattach the screw and side panel, and you’re good to go.

How do I transfer data from old hard drive to new hard drive?

There are several ways to do this:

You can use a USB hard drive enclosure, which is a special “box”-like device that you slide the old drive into.
You can also use a USB hard drive adapter, which is a cable-like device, connecting to the hard drive on one end and to a USB in the new computer on the other.

How do I transfer my PS3 data to my SSD?

Clone PS3 hard drive to SSD with built-in utilities

Connect USB drive or other storage device to PS 3 and format as FAT32.
go to Settings > System settings and press “X” button to enter the next page.
Then, click Backup and press “X” button to enter in.

How to transfer data from PS3 hard drive to external hard drive?

Solution1: transfer data from PS3 hard drive to new hard drive via Backup & Restore utility. You may complete this solution by means of an external hard drive. Theoretically, you back PS3 hard drive up to the external hard drive and later restore the backup image from the external drive. Connect the external hard drive to your PS3.

How to make a new hard drive for a PS3?

1 Wait for at least 10 minutes in order to let your console cool down and then open the HDD door from its lower case. 2 Take out the hard drive from the steel cage and then insert the new drive into it, then using the screw to hold the drive. 3 Restore the saved data to the new drive.

How can I backup my PS3 to a FAT32 hard drive?

1. Connect USB drive or other storage device to PS 3 and format as FAT32. 2. go to Settings > System settings and press “ X ” button to enter the next page. 3. Then, click Backup and press “ X ” button to enter in. 4. Now, select Backup option instead of Restore or Delete Backup Data.

What happens when you swap hard drives on a PS3?

Backed up my protected saves just in case things didn’t go according to plan. Once the backup was complete, removed the hard drives (320GB & 160GB in my case) from both consoles and swapped them. Booted up each console and performed the requested formatting of each drive. Restored the backup from step 3 onto the old PlayStation 3.