How do you turn off the anti-theft system on a Pontiac Grand Prix?

The keyless entry remote and the ignition key are required to reset the anti-theft system.

Exit the vehicle and stand next to the driver’s side front door.
Press and hold the lock and unlock buttons on the keyless entry remote until the horn honks once and the lights flash briefly.

How do you reset the security system on a 2000 Pontiac Grand Prix?

Turn the ignition switch all the way from the OFF to the START position, then leave it in the ON position. The engine will not crank. The SECURITY light should come on and stay on for at lease ten minutes. Turn the ignition switch to the OFF position for five seconds.

How do you disarm theft deterrent system?

Method 3: Insert the key into your car’s door Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

How do I reset my Pontiac security system?

how do you reset the security on a Pontiac Grand Am? Turn the key to the on position for 10 minutes then turn off, repeat 2 more times. the system should reset. Mine usually resets on the second time, if the security light stops flashing then i try to start.

How do you fix starting disabled due to theft system?

It can be triggered by all sorts of things. In order to relinquish this you must have a key to turn the ignition. These are not coded just plain cut keys. Once you attain this you put the key in and turn the ignition to the ACC position and wait ten minutes (theft lock light will turn off), turn off and take key out.

Can you disable PassLock?

The Passlock system on a Vehicles is the anti-theft system. The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.

How do you reset a Grand Prix computer?

turn the key on for 10 minutes or more if you want. then you will see the security light stop blinking, then you turn the key off. you repeat this three times then it should start. Good luck.

How do I get my car out of anti-theft mode without remote?

Resetting the Alarm

Close all of your car doors.
Insert one key in the door lock and cycle it to the “Lock” position, and then back to the “Unlock” position two times.
Enter your car and insert your key into the ignition cylinder.
Cycle the key in the ignition from the “Off” position to the “On” position twice in a row.

Will disconnecting battery reset anti-theft?

Disconnect the Battery By unplugging the battery for a few minutes, it will also reset the computer. All you have to do is disconnect the positive or negative terminal and wait. After waiting a few minutes, you can reconnect it and see if that has solved your problem.

How do I get my car out of anti theft mode Pontiac G6?

1 Answer

Sit in your car and ensure all doors are closed.
Put the key into the ignition while holding the lock button on the driver’s door.
Turn the G6 key in your ignition from “On” to “Off” while holding the “Lock” button, and do two more cycles of “On” and “Off” in quick succession.

Why is my car in anti-theft mode?

A car’s anti-theft system may activate if your key fob battery is dead and hasn’t disabled the system. Make sure the battery is installed correctly in your key fob.

How to disable the theft system on a GM car?

Disconnect the battery for 15 minutes. If the Theft System light disappear, you might be fine for few days, months, but it will not get rid of the problem. 2. If your keyring is too heavy full of keys, the weight of the extra keys pulls on the ignition key causing the key to be incomprehensible.

How can I Turn Off my Car anti theft system?

Step 1: Check your key fob battery. A car’s anti-theft system may activate if your key fob battery is dead and hasn’t disabled the system. Make sure the battery is installed correctly in your key fob. If the battery is correctly installed, replace it with a fresh battery and try again. Step 2: Check your door lock cylinder.

What to do if your anti theft system is locked up?

If the anti-theft system has locked up your engine, you won’t be able to start it. You’ll have to disable it with these steps. Step 1: Check for the anti-theft light. It’s located on your dash and will have a blue or red light. Step 2: Turn the ignition to the “on” position.

How to disengage anti theft system in Ford?

You can turn off Ford anti theft by following these steps: First step is removing positive cable from battery in order to place key in automobile safely. Second step is to turn the “on” position then replace the positive cable. Last step, drivers need to turn the key off and on in order to reset the anti theft system.

How to reset the theft system in a Pontiac Grand Prix?

Enter the vehicle and insert the ignition key into the ignition. Turn the ignition to the “ON” position but do not start the engine. Wait 30 seconds and start the engine. Verify that none of the security lights on the dashboard are flashing or illuminated.

How do you shut off the anti-theft device in your car?

Step 1: Insert your key in the lock on the door. Use the driver’s side door and the physical key even if your vehicle is equipped with a keyless entry system. Step 2: Turn the key. Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds.

How can I disable my anti theft system?

You can use best obd2 scanner to find the code and fix problem. Another tip you can use to try to disable your anti-theft system is to use the key in the door. You want to make sure to use the driver side door and the physical key to having a chance of this working.

Turn the key to On position (make sure heater fan is off or kill the battery) and leave key in the on position for 30 mins. Pull the fuse out of the security system and replace it again to reset it prior to this and see if that helps.

What causes the security light to come on in a Grand Am?

The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back. Most likely, you need a new ignition cylinder. Those are what usually go bad on the Grand Prix cars.

How do you bypass the security on a Pontiac Grand Am?

Turn the ignition key to the “Run” position after two to three seconds. Leave the key in this position for 10 minutes. Start the engine as soon as the security light stops flashing and remains on. The Passlock system resets and the engine starts normally.

How do I get my car out of anti-theft mode?

Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.

What triggers theft-deterrent system?

The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) Charging alarm (electric vehicles only)

How do you reset theft deterrent?

All you need for this is your ignition key.

Insert the ignition key in the Accord’s driver-side door lock.
Turn the key to the unlock position.
Turn the key to the lock position.
Turn the key back to the unlock position. The alarm should now be disabled.

How do I permanently disable passlock?

How to Disable a GM PassLock System

Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
Look at the dashboard and locate the theft system light.
Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

What does passlock 2 disable?

Most GM vehicles come with the Passlock II ignition security system, an anti-theft device that disables the vehicle’s ignition system during most theft attempts. The most common failure mode of Passlock II is when the ignition switch no longer recognizes the resistor embedded into the key, causing a no-start condition.

How do I bypass passlock GM security system?

Thankfully this is an easy fix.

Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
Look at the dashboard and locate the theft system light.
Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

What does it mean when the security light comes on?

On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.

How do you reprogram a GM ECM?

How do I reprogram my GM ECM?

Remove the nut from the negative battery cable using a socket set or wrench. Slide the cable off of the battery and set it aside.
Turn the headlight switch to the “On” position to drain the ECM of any remaining power. Wait at least 10 minutes, then turn it back to the “Off” position.

How do you bypass a car alarm?

Combination Of The Car Door and Key Insert your car key on the driver’s door and turn to disable the system without taking the keys out. The key should be in the keyhole for 30 seconds. The car would detect that you are the owner and allow you to bypass the alarm system.